The Foot Troll
The Displays
CALIBRATION:
The Calibration of the displays is a sensitive procedure.
Since measurements of changes as small as 1 mV are being reflected in the display units, which combination of displays and which stock PSU used can affect the readouts.
Systems need to be on and warmed up, and the selection of which displays used should be hooked up.
Careful trimming of the trim pots on each display can be then adjusted with the pedal full forward, i.e., no attenuation.
Care should be taken to not break the trim pot when adjusting.
Please Note:
In theory, a Y cable can be utilized to have 3 displays on one system. Care must be taken that all connections are discrete and pin to pin. Re-calibration of the displays may be required. All other internal calibrations are sensitive and require an accurate multimeter and must follow an exact procedure. Contact Czech Electric for the procedure.
We accept money orders and all major credit cards through PayPal.
Please contact us before ordering with any
questions you may have.